«ISOCROM-G»
Two-component polyurethane sealant of cold hardening
Izocrom-G sealant represents the elastic two-component mastic applied to sealing:
– joints between external wall panels, plates of coverings, overlappings, temperature seams;
– roof joints from galvanized steel, a metal tile and a professional flooring, and an adjunction between them and brick, concrete, stone ventilating, and chimney systems;
– knots and connections of steel bridge structures and also deformation seams;
– elements of protections from ferrous and non-ferrous metals in stained-glass windows, show-windows, glass blocks, etc.;
– joints, cracks, cracks by preparation of a surface under putting roofing mastics;
– deformation seams of pavings.
Besides, Izocrom-G sealant can be applied as glue structure to polyurethane foam gluing – isolation to pipes, gluings of plates of heaters to concrete, iron and a tree including with bituminous isolation.
Izocrom-G sealant has the following properties:
Advantages of Izocrom-G sealant:
– the considerable maximum permissible relative deformation of joints perceived by material to (30%);
– high resistance to atmospheric and climatic influences, for example, to UV-radiation and also to influences of hostile environment (oils, gasoline, solutions of salts, acids, weak solutions of alkalis);
– lack of need of a preliminary priming of a surface before drawing;
– maintaining elasticity at big differences of temperatures;
– good adhesion to concrete, metal, a tree, a natural stone;
– the lack of solvent providing nonshrinking process of hardening;
– an opportunity to give the necessary color to sealant in the course of production and also to paint already caused and harden structure alkyd paints (PPH, GPH type);
– the durability not less than 10 years reducing frequency of repair of objects that leads to reduction of material inputs.
Characteristics of material can be modified according to requirements of the customer.
«ISOCROM-I»
Mastic polymeric unicomponent
Unicomponent Isocrom-I mastic is intended for drawing on the concrete, metal, wooden and polymeric bases (except polyethylene, polypropylene and the phtoroplaste of surfaces) as a waterproofing and wearproof covering, the impregnation and primer on concrete increasing its durability and resistance to attrition and also for production of bulk floors.
“Isocrom – I” mastic allows to increase durability and resistance to attrition, to make a pylesvyazyvaniye of the raising dust surface particles, to increase resistance to effect of solutions of salts, oil products and other aggressive factors. Material “Isocrom – I” can be also applied with filling by a rubber crumb to production of wearproof and weather-resistant coverings in various color execution on children’s game and sports grounds, pedestrian zones, garden paths, etc.
Isocrom – I mastic has the following properties:
– with concrete 1,0 (10,0);
– with iron 0,78 (7,8).
Advantages of unicomponent polymeric Isocrom-I mastic:
Characteristics of material can be modified according to requirements of the customer.
«ISOCROM – K»
Unicomponent bitumno – polymeric mastic of cold hardening
Unicomponent bitumno – polymeric mastic “Isocrom – K” is intended for a waterproofing of the bases, various hydraulic engineering constructions, the device new and repair of old soft roofs and for a prikleyka of rolled roofing materials to various surfaces. Mastic may contain bactericidal, anti-fungal, reflecting and light-protective structures.
The cured unicomponent mastic “Isocrom – K” represents the rubber-like, waterproof material having the following properties:
– In case of temperature +20оС 500,
– In case of temperature -20оС 160.
– with concrete 1,2,
– with metal (P.3) 1,0.
Advantages of mastic “Isocrom – K” at the device new and repair of an old roof:
Characteristics of material can be modified according to requirements of the customer.
“ISOCROM – K”
Two-component polyurethane – bituminous roofing mastic cold hardening
Mastic “Isocrom – K” – the modern waterproofing material intended for the device new and repair of old soft roofs including metal. Material is also applied at a waterproofing of various types of underground constructions, the bases, cellars, pools, socles and as anticorrosive protection of all types of surfaces from ferrous metals and also the bottoms of cars.
Mastic “Isocrom – K” represents the rubber-like, elastic, waterproof material having the following properties:
– group of combustibility – C3 (GOST 30244-94);
– group of inflammability – I2 (GOST 30402-96);
– group of distribution of a flame – DF1 (GOST P 51032-97).
Advantages of mastic “Isocrom – To” at the device new and repair of an old roof:
Characteristics of material can be modified according to requirements of the customer.
«ISOCROM – F»
Fiberglass rolled foil
Fiberglass “Isocrom-F” is a heat-insulating roll material manufactured by LTD “PSK Interstroiservice”, which is a filigree fiberglass, glued together with a polyethylene film in a thermal way with corrugated aluminum foil. Designed to protect thermal insulation structures of heat pipes from environmental influences inside and outside the premises.
Fiberglass “Isocrom-F” is used on steam, heat pipes, pipelines, municipal water pipes and industrial enterprises of various industries.
Operational qualities – such as durability, moisture resistance and high insulating properties – allow the use of fiberglass “Isocrom-F” in various climatic conditions, such as the Far North, Central Asia and other regions of Russia.
Isocrom-F fibreglass possesses the following technical characteristics:
– length до 20 п.м.;
– width 1 м;
– mass не более 20кг;
– corrugation height 6-10 мм;
– temperature of processing от -60оС до +170оС;
– effective coefficient of thermal conductivity 0,089 Вт/мк;
– serving time 20-25 лет.
Advantages of fiberglass “Isocrom-F” for thermal insulation: